1592022750 Quick reference guide IC 200CX Rel. 1.1 25/05/2009
Pag. 14/58
7 FIRST INSTALLING
7.1 ON BOARD CLOCK (OPTIONAL)
Giving power supply the bottom display shows “rtC” alternated to a temperature or pressure value: It
is necessary to set the RTC (Real time clock).
ATTENTION
The RTC function is an option and it is not possible to update the instrument It is necessary to
order the instrument already complete of this features.
With a prolunged power failure (several days) it is necessary to setup the clock again.
7.2 RTC SETUP
1. Push Menu key for 3 seconds until the bottom display shows “Hour” and the top display shows
its value.
2. Push SET one time: the value is blinking.
3. Use the Up and Down keys to adjust it. Push SET one time to confirm.
4. Push up or down keys and repeat the operations 2. 3. and 4. for all the RTC parameters:
- Min: minutes (0÷60)
- UdAy: day of the week (Sun = Sunday, Mon =Monday, tuE =Tuesday, UEd = Wednesday, tHu
= Thursday, Fri =Friday, SAt =Saturday)
- dAy: day of the month (0÷31)
- MntH: month (1÷12)
- yEAr: year (00÷99)
To Next Page
Loading...
