EasyManuals Logo

dixell IC200CX Series User Manual

dixell IC200CX Series
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
1592022750 Quick reference guide IC 200CX Rel. 1.1 25/05/2009
dF 21
Forced defrost differential 0.1
1
0.0
0
25.0
45
14.0
203
°C
°F
Bar
Psi
Dec
int
Dec
int
Defrost operative mode
dF 22
Defrost start-up in unit with 2 circuits
0= Independent
1= If both have reached the necessary requirements
2= If one has reached the necessary requirements
0 2
dF 23
End defrost in unit with 2 circuits and common ventilation
0= Independent
1= If both have reached the necessary end defrost requirements
2= If one has reached the necessary end defrost requirements
0 2
Start / stop defrost from analog input
Param
eters
description min max udm resolut
ion
dF 24
Start / stop defrost probe
0= start and stop with condenser temperature / pressure probe
1= start with evaporator pressure probe / stop with condenser
temperature / pressure probe
2= start with condenser temperature / pressure probe / stop with
evaporator pressure probe
3= start and stop with evaporator pressure probe
0 3
Supply fan functioning during defrost cycle
dF 25
Set point to enable defrost with condenser fan
-50.0
-58
70.0
158
°C
°F
Dec
int
Defrost with condenser fan
dF 26
Supply fan status during the defrost cycle
0= Enabled
1= Not enabled
0 1
Minimum temperature water outlet during defrost
dF 27
Probe selection for minimum temperature outlet during defrost 0 6
dF 28
Set point for minimum temperature outlet during defrost
-50.0
-58
0.0
0
70.0
158
50.0
725
°C
°F
bar
psi
Dec
int
Dec
int
Pr1
Password 0 999
Pr2
Password 0 999
Pr3
Password 0 999
Alarms
Param
eters
Description min max m. u. Resolu
tion
Low alarm
AL 1
Low pressure alarm delay from analog and digital input 0 250 Sec
AL 2
Low pressure alarm delay if the low pressure switch is used for the
pump down.
AL02= 0 low pressure alarm not enable during compressor switching
off from pump down and if compressor OFF
AL02 0 low pressure alarm enable after AL02 (starting from
compressor switch off) time with compressor OFF
0 250 Sec 10 Sec
AL 3
Low pressure alarm setpoint from analogue input -50.0
-58
0.0
0
70.0
158
50.0
725
°C
°F
bar
psi
Dec
int
Dec
int

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dixell IC200CX Series and is the answer not in the manual?

dixell IC200CX Series Specifications

General IconGeneral
Branddixell
ModelIC200CX Series
CategoryTemperature Controller
LanguageEnglish

Related product manuals