Page 23
CLEAR TOTALS
Allows the service technician to clear totals in CASH BOX, SALES, NUMBER SOLD, DOOR OPENINGS, and
POWER OUTAGES.
Press the letter “F” on the keypad and the display will read “CLEAR TOTALS * = Y”. Press the “*” key, the totals are
cleared and the display returns to “SERVICE MODE”.
NUMBER SOLD
Shows the total number of items sold since the last CLEAR TOTALS or MASTER RESET. Press the number “1” on
the keypad and the display will read “NUMBER SOLD ###”. Press the "CLR" key to return to "SERVICE MODE".
ENABLE ITEM
Allows an individual selection, a complete tray, or the entire machine to be enabled or disabled. Press the number
"2" on the keypad and the display will read "ENABLE ITEM". Press the "*" key and the display will read "ITEM".
There are now three choices:
1. Pressing the "*" key will toggle between enable and disable for the entire machine, the display will
show the current state.
2. Pressing a tray selection followed by "*" will show the current state of that tray, for example, pressing
"A*" will show the current state for the A tray, pressing '"A* again will toggle the state.
3. Pressing an item selection will show the current state of that item, for example, pressing "A1" will
show the current state of that item, pressing "A1" again will toggle the state.
Press the "CLR" key to return to "SERVICE MODE".
SALES PER COL
Shows the total number sold from each selection since the last CLEAR TOTALS or MASTER RESET.
Press the number “3” on the keypad and the display will scroll “SALES BY COLUMN”. Press the “*” key and the
display will read “ITEM”. Select the item to be checked (the total number sold from that selection will be on the left
side of the display and the item number will be on the right side of the display). Press the “CLR” key when
completed.
ESCROW
Allows a bill to be returned if the change return lever is pressed before a selection is made.
Press the number “4” on the keypad and the display will read “ESCROW Y” or "ESCROW N”, depending on the
current state. Pressing the “*” key will toggle the state. This feature only affects those machines with a bill validator
installed. Press the "CLR" key to return to "SERVICE MODE".
FORCE
Allows the change return lever to be inhibited until after the lowest vend price is made or exceeded.
Press the number “5” on the keypad and the display will read “Force Y” or “FORCE N”, depending on the current
state. Pressing the “*” key will toggle the state. Press the "CLR" key to return to "SERVICE MODE".
SET PRICE
Allows the setting of regular prices for an individual item, a complete tray, or the entire machine.
Press the number “7” on the keypad and the display will scroll “SET REGULAR PRICES” once, then “$00.00” will be
displayed. Prices are entered using the numbers on the keypad and will shift in from the right as numbers are
pressed.
Price setting is covered in detail in the INITIAL PROGRAMMING section of this manual. See pages 36, 37, and 39.
Press the "CLR" key to return to "SERVICE MODE".
SET HAPPY
Allows the setting of Happy Hour prices for an individual item, a complete tray, or the entire machine.
Press the number “8” on the keypad and the display will scroll “SET HAPPY HOUR PRICES” once, then “$00.00”
will be displayed. Happy hour prices are entered in the same way as regular prices. Refer to price setting in the
INITIAL PROGRAMMING section of this manual. See pages 26 and 27. Press the "CLR" key to return to
"SERVICE MODE".
To Next Page
Loading...
