Page 45
NOT AVAILABLE TIMES
Many locations, such as schools, have requirements that the machines be rendered "unavailable" during certain
times. The procedures for setting Not Available Times are nearly identical to those for setting Happy Hour times.
The only difference is, instead of pressing the number "2" on the keypad to access the program, you now press the
number "3".
This area is password protected. Before entering or changing this setting the service technician must enter the
password.
Enter "SETUP MODE" by opening the service door and pressing the Mode Selection button three times.
Press the number "3" on the keypad and "SET NOT AVAILABLE" will scroll across the display. Press the "*" key,
the display will read "PW". Enter the password and the display will flash "OK". Then '"N.A. START TIME 00 00" will
scroll across the display. The service technician can now set the programming for the Not Available period.
POINTS TO REMEMBER:
• Before setting Not Available times and days, it is recommended that the service technician check
DATE/TIME settings in the system's programming.
• All times entered must be in 24 hour format.
The example on the following page will step through setting Not Available times and days. Enter the "SETUP
MODE" and proceed as follows:
SETTING NOT AVAILABLE TIMES
Setting time from 0830 to 1700
(8:30 AM to 5:00PM)
on Monday through Friday
Press Key Display will read
3 SET NOT AVAILABLE
scrolls
* PW
Enter password OK (flashes then) N.A.
START TIME 00 00 scrolls
* HOUR
0 OUR 0
8 UR 08
* MIN
3 IN 3
0 N 30
* N.A. END TIME 00 00
scrolls
* HOUR
1 OUR 1
To Next Page
Loading...
