Page 39
REGULAR PRICES
The capability of this machine to vend a wide variety of products requires the ability to set a wide range of prices.
The programming features of this machine meet that requirement by allowing the service technician to quickly and
easily enter or change regular prices.
Enter "SERVICE MODE" by opening the service door and pressing the Mode Selection button once.
Press the number "7" on the keypad and the display will scroll "SET REGULAR PRICES". Then "$00.00" will be
displayed. As the prices are entered the numbers will shift in from the right on the display. When the desired price
is displayed it may be assigned to an individual selection, an entire tray (shelf), or to all selections in the machine.
When setting prices for individual selections DO NOT press the "*" key. The "*" key is only used to assign a price to
an entire tray or to all selections in the machine. When setting one price for an entire tray the "*" key is pressed
after designating the tray (display reads "$1.00 A"), when the "*" key is pressed the display will read "$1.00 A*"
momentarily then will return to just the price. When setting the entire machine at one price the "*" key is pressed
after entering the price (display reads "$1.00"), when the "*" key is pressed the display will read "$1.00 **"
momentarily then will return to just the price.
When setting prices for individual selections the tray and column (i.e., A1) is entered following the price. As soon as
the column designator (the number) is pushed, the price and selection will be displayed momentarily (i.e., "$1.00
A1"), then the display will return to just the price.
Always check the setting for MAX CREDIT before setting prices (Not applicable to International machines).
POINTS TO REMEMBER:
• Prices entered must not exceed the MAX CREDIT set in the system's program (Not applicable to
International machines).
• DO NOT press the "*" key when setting prices for individual selections.
The following example will step through setting the entire machine to one price. Enter the "SERVICE MODE" and
proceed as follows:
SETTING ONE PRICE
Setting the entire machine to $1.50
Notice the impact of pressing the "*" key
Press Key Display will read
7 SET REGULAR PRICES (scrolls
then) $0.00
1 $0.01
5 $0.15
0 $1.50
* $1.50
CLR SERVICE MODE
To Next Page
Loading...
