Page 43
HAPPY HOUR PRICES
The procedures for setting Happy Hour prices are nearly identical to those for setting regular prices. The only
difference is, instead of pressing the number "7" on the keypad to access the program, you now press the number
"8" when in "SERVICE MODE".
Enter "SERVICE MODE" by opening the service door and pressing the Mode Selection button once.
Press the number "8" on the keypad, the display will scroll "SET HAPPY HOUR PRICES", then "$00.00" will be
displayed. As the prices are entered the numbers will shift in from the right on the display. When the desired price
is displayed it may be assigned to an individual selection, an entire tray (shelf), or to all selections in the machine.
When setting prices for individual selections DO NOT press the "*" key. As soon as the column designator (the
number) is pushed, the price and selection will be displayed momentarily (i.e., "$1.00 A1"), then the display will
return to just the price. The "*" key is only used to assign a price to an entire tray or to all selections in the machine.
When setting one price for an entire tray the "*" key is pressed after designating the tray (display reads "$1.00 A"),
when the "*" key is pressed the display will read "$1.00 A*" momentarily then will return to just the price.
When setting the entire machine at one price the "*" key is pressed after entering the price (display reads "$1.00"),
when the "*" key is pressed the display will read "$1.00 **" momentarily then will return to just the price.
Always check the setting for MAX CREDIT before setting prices (Not applicable to International machines).
POINTS TO REMEMBER:
• Prices entered must not exceed the MAX CREDIT set in the system's program prices (Not applicable
to International machines).
• DO NOT press the "*" key when setting prices for individual selections.
The following example will step through setting two different Happy Hour prices in the machine. Enter the
"SERVICE MODE" and proceed as follows:
To Next Page
Loading...
