Dixie Narco 2145 - Cashflow 560 Unit Operating Mode Menu Items; Service Mode; Mode Menu Item

Page 31
CASHFLOW 560 UNIT OPERATING MODE MENU ITEMS
KEY SERVICE MODE KEY TEST MODE KEY SETUP MODE
A NEXT ITEM A NEXT ITEM A NEXT ITEM
B B LIST ERRORS B
ENTER MESSAGE
C SALES C SELF TEST C
CLEAR MESSAGE
D D DISPLAY TEST D
E SET COOL DOWN E KEYPAD TEST E
CLEAR COOL DOWN
F CLEAR TOTALS F AUTO SEQUENCE F
MASTER RESET
1 NUMBER SOLD 1 1
MACHINE NUMBER
2 ENABLE ITEM 2 2
SET HAPPY HOUR
3 3 3
SET NOT AVAILABLE
4 4 4
WINNER MODE
5 5 DOOR OPENINGS 5 DATE/TIME
6 6 POWER OUTAGES 6 TOTAL SALES
7 SET PRICE 7 7
8 SET HAPPY 8 8
9 TEST VEND 9 TEST VEND 9
0 CLEAR ERRORS 0 CLEAR ERRORS 0
SET PASSWORD
NOTE: All items in Bold under SETUP MODE require entry of the password for access.
Factory default password is 0000.
SERVICE MODE
Enter SERVICE MODE by opening service door and pressing the Mode Selection button once. The display will
read "SERVICE MODE".
SALES
Shows total sales since last CLEAR TOTALS or MASTER RESET. To view the total sales press the letter "C" on
the keypad and the display will read "SALES $###.##".
Press the "CLR" key to return to "SERVICE MODE".
SET COOL DOWN
Allows the service technician to set a cool down period for each selection that is warm after restocking. This feature
may be set on an individual item, an entire row, or the entire machine. Once set, the cool down period is 240
minutes (4 hours).
Press the letter "E" on the keypad and display will read "SET COOL DOWN". Press the "*" key and the display will
read "ITEM". There are now three choices:
1. Pressing the "*" key will place the entire machine in cool down.
2. Pressing a row selection followed by "*" will place that row in cool down. (For example, pressing
"A*" will place the "A" row in cool down.)
3. Pressing an item selection will place just that item in cool down. (For example, pressing "A1" will
place that selection only in cool down.)
Press the "CLR" key to return to "SERVICE MODE".
CLEAR TOTALS
Allows the service technician to clears totals in SALES, NUMBER SOLD, DOOR OPENINGS, and POWER
OUTAGES.
Press the letter "F" on the keypad and the display will read "CLEAR TOTALS * = Y". Press the "*" key, the totals
are cleared and the display returns to "SERVICE MODE".