54 XT30/XT50 User Guide Appendix C
ARMING AND DISARMING AN ALL/PERIMETER SYSTEM
Press CMD. The keypad displays PERIM ALL (when arming) or DISARM?. Press the select key or area
under the desired option. The keypad displays ENTER CODE: -.
Present your card to the reader. Once the system validates the card, if you choose PERIM, only the
perimeter arms. If you choose ALL, both areas arm. If programmed on a 32-character keypad, ALL
is automatically chosen for you after a short delay. All armed areas disarm automatically.
ARMING AND DISARMING A HOME/AWAY SYSTEM
Present your card to the reader. If the system is armed, once the system validates the
card, all areas are disarmed and the keypad displays ALL SYSTEM OFF.
If the system is disarmed when you present your card, once the system validates the
card, HOME SLEEP AWAY displays. You can manually press the select key or area
under the desired option or after short time all areas automatically arm in the AWAY
mode.
ENTRY DELAY
All Systems - Once the protected door is opened and the entry
delay starts, the keypad displays ENTER CODE: - . Present your
card to the reader and, once validated, the system disarms all areas
and activates the Door Strike relay. The top line of 32-character
keypads displays the zone name. Area systems provide a delay to
allow selected areas only to be disarmed. See Arming and Disarming
above and on the previous page.
Using the access reader for user menu access
You can also use a card reader to access the User Menu when
MENU? NO YES displays.
PERIM ALL
DISARM?
or
ABC SECURITY
HOME SLEEP AWAY
ABC SECURITY
ENTER CODE: –
To Next Page
Loading...
Need help?
General
