DMP Electronics XT30 User Manual

Appendix C XT30/XT50 User Guide 55
Once you've cleared the default
name, a dash appears
on the left side of the display.
To enter a custom name into
the keypad, you use the
three rows of number keys.
To enter a custom name,
press the number key above
the letter you want to enter.
For lower case letters press
the number key followed by
the select key for the desired
letter twice.
Under each number key are
three letters.
{
A
B
C
1
2
Once the letter you want displays,
press the number key above the
next letter you want to enter.
You can enter up to 16 characters
for each name into the keypad.
3
4
The nine and zero keys . .
Y, y
Z, z
(space), :
–
Pressing the 0 (zero) key provides
you with a – (dash), . (period),
* (asterisk), and a # (pound sign).
*
#
With the number displayed, press
the SELECT key/area that matches
the letter position. See example.
1 2 3 4
5 6 7 8
9 0
CMD
-
1
1
1 2 3 4
5 6 7 8
9 0
CMD
A
9
0
.
Pressing the 9 key provides you with
Y, Z, and a space to use between
names. Pressing the 9 key followed
by the select key for the desired letter
twice provides the lower case letters
y, z, :, or ;. For example: Bob Smith
;
Entering User Names
Refer to the following when entering names information into the keypad.

DMP Electronics XT30 Specifications

General

Brand	DMP Electronics
Model	XT30
Category	Control Panel
Language	English