Appendix D XT30/XT50 User Guide 59
Activating Favorites with Text Messaging
Allows you to activate a Favorite of Z-Wave compatible devices.
1. To activate a Favorite, text ACTIVATE followed by the Favorite
name. For example, to activate the Favorite named House
Lights, you would text: ACTIVATE HOUSE LIGHTS.
Check Armed Status Text CMD
Allows you to check the system armed status. If armed, the system
will send a message stating the type of system you have followed by
ON, such as ALL SYSTEM ON or HOME SYSTEM ON. If disarmed and no
open zones, the system will send SYSTEM READY. If disarmed with
open zones, it will send SYSTEM NOT READY followed by any open
zones. A message of AC POWER TROUBLE will indicate when a power
failure occurs. If in alarm or trouble, the system will send ALARM ON
or TROUBLE ON followed by up to 3 zone names that are in alarm
or trouble.
1. To receive the Armed Status, text: STATUS.
Check Status of Lights, Doors, and Thermostats Text
CMD
Allows you to check the status of Z-Wave compatible lights, doors,
and thermostats. The status shows which devices are currently on
and any devices that are not responding.
1. To receive the Status of Z-Wave compatible lights, text:
STATUS LIGHTS.
2. To receive the Status of Z-Wave compatible doors, text:
STATUS DOORS.
3. To receive the Status of Z-Wave compatible thermostats,
text: STATUS THERMOSTATS.
Subscribe to Text Messages
Allows you to set which text messages you receive from the panel.
When your system is programmed to allow text messages, you will
not be subscribed. To change your subscription status, follow the
instructions below for desired messages.
1. Text the words SUBSCRIBE STATUS ALL to receive a text
message for all arming and disarming occurrences in
addition to any alarm.
2. Text the words SUBSCRIBE STATUS NONE to not receive a
text message for arming and disarming occurrences, but
still receive a text message for any alarm.
3. Text the words SUBSCRIBE STATUS OTHERS to receive a
text message for all arming and disarming occurrences
originating from other users, in addition to any alarm. This
option will send a text message for all arming and disarming
occurrences except for the ones you initiate at a keypad.
4. Text the word SUBSCRIBE to show the current subscription
status and the available subscription options.
To Next Page
Loading...
Need help?
General
