TEST ACTION APPLICABILITY
7 Turn the ignition off.
Access and disconnect the Right I/P Speaker harness connector.
Disconnect the Amplifier C2 harness connecter.
At theAmplifier C2 harness connector, measure the resistance between the Right I/P
Speaker (+) circuit and Right I/P Speaker (-).
Is the resistance above 1000 ohms?
All
Yes → Replace the Amplifier in accordance with the service information.
Perform BODY VERIFICATION TEST - VER 1.
No → Repair the I/P Speaker circuits that are shorted together.
Perform BODY VERIFICATION TEST - VER 1.
201
AUDIO
FRONT I/P CHANNELS SHORTED TOGETHER OR TO GROUND —
Continued
To Next Page
Loading...
