Symptom List:
ACCELEROMETER 1
ACCELEROMETER 2
DEPLOYMENT DATA RECORD FULL
INTERNAL 1
INTERNAL 2
OUTPUT DRIVER 1
STORED ENERGY FIRING 1
Test Note: All symptoms listed above are diagnosed using the same tests.
The title for the tests will be INTERNAL MODULE TEST.
When Monitored and Set Condition:
ACCELEROMETER 1
When Monitored: With the ignition on, the module on board diagnostics continuously
performs internal circuit tests.
Set Condition: This DTC will set if the module identifies an out of range internal circuit.
ACCELEROMETER 2
When Monitored: With the ignition on, the module on board diagnostics continuously
performs internal circuit tests.
Set Condition: This DTC will set if the module identifies an out of range internal circuit.
DEPLOYMENT DATA RECORD FULL
When Monitored: At ignition on the ACM monitor the ACM stored deployment record
memory location.
Set Condition: The DTC will be latched active permanently after three airbag deploy-
ments.
INTERNAL 1
When Monitored: With the ignition on, the module on board diagnostics continuously
performs internal circuit tests.
Set Condition: This DTC will set if the module identifies an out of range internal circuit.
INTERNAL 2
When Monitored: With the ignition on, the module on board diagnostics continuously
performs internal circuit tests.
Set Condition: This DTC will set if the module identifies an out of range internal circuit.
22
AIRBAG