TEST ACTION APPLICABILITY
3 NOTE: The EBL status indicator can flash at two different rates, twice per
second (fast rate) when the control is indicating that the HVAC Door Recal
needs to be run, and once every two seconds (slow rate) when the HVAC
Door Recal is in progress.
NOTE: When the EBL status indicator is flashing, it will not indicate EBL
operating status. However, the EBL switch will continue to function nor-
mally.
NOTE: When the EBL status indicator is flashing, the A/C status indicator
will not function. However, the A/C switch will continue to function nor-
mally.
With the DRBIIIt in HVAC, System Tests, actuate the HVAC Door Recalibration
Test.
Does the DRBIIIt display: Recalibration Test Passed?
All
Yes → Test Complete.
No → Return to the symptom list and choose the symptom(s).
Perform BODY VERIFICATION TEST - VER 1.
400
HEATING & A/C
*A/C STATUS INDICATOR FLASHING — Continued
To Next Page
Loading...
