Thank you very much for selecting the DOLMAR brushcutter. We are pleased to be
able to offer you the DOLMAR brushcutter which is the result of a long development
programme and many years of knowledge and experience.
Please read, understand and follow this booklet which refers in detail to the various
points that will demonstrate its outstanding performance. This will assist you to
obtain the best possible result from your DOLMAR brushcutter.
Table of Contents Page
Symbols .........................................................................2
Safety instructions .........................................................3
Technical data ...............................................................7
Designation of parts.......................................................8
Assembly of engine and shaft .......................................9
Mounting of handle ........................................................9
Mounting of protector...................................................10
Mounting of cutter blade or nylon cutting head............12
Fuels/refuelling ............................................................13
Correct handling of machine........................................14
Putting into operation...................................................15
Resharpening the cutting tool ......................................16
Maintenance schedule.................................................20
Storage ........................................................................21
You will note the following symbols when reading the instruction manual.
Read instruction manual and follow the
warnings and safety precautions!
Keep the area of operation clear of all
persons and pets
Take particular care and attention
Wear protective helmet, eye and ear
protection
Forbidden Top permissible tool speed
Keep distance Fuel and oil mixture
Flying object hazard Engine-Manual start
No smoking Emergency stop
No open flame First Aid
Protective gloves must be worn ON/START
Wear sturdy boots with non-slip
soles. Steel toed safety boots are
recommended.
OFF/STOP
Kickback
SYMBOLS
English
(Original instructions)
2
To Next Page
Loading...
