Domino D Series User Manual

MAINTENANCE AND FAULT FINDING
L025317 Issue 1 March 2011 5-11
602 Laser Off Delay
Retriggered
Laser parameter
misconfiguration in
message.
Contact Domino
603 Laser On Delay
Retriggered
Laser parameter
misconfiguration in
message.
Contact Domino
604 I2C Sensor Bus
Fault
Hardware
malfunction
Contact Domino
605 I2C Feature Bus
Fault
Hardware
malfunction
Contact Domino
606 Marking
Controller -
Transfer CRC
Fault
Marking Controller
malfunction
Contact Domino.
607 Marking
Controller - List
CRC Fault
Marking Controller
malfunction
Contact Domino.
1000 Non volatile
storage plugin
failed to load.
Internal fault in
software installation.
Contact Domino.
1001 Non volatile
storage not
connected.
Wrong system setup
or hardware not
working.
Contact Domino.
1002 Non volatile
storage not
formatted.
Hardware fault. Contact Domino.
1003 Non volatile
storage format too
old.
Software version is
incompatible with
hardware version.
Contact Domino.
1004 Non volatile
storage format too
new
Software version is
incompatible with
hardware version.
Contact Domino.
1005 Non volatile
storage capacity
exceeded.
Too many dynamic
text contents like
counters, text inserts
and codes used in the
message.
Reduce number of counters
and text inserts and then try
again. If unresolved contact
Domino.
Status Message Cause Suggested Action

Domino D Series Specifications

General

Brand	Domino
Model	D Series
Category	Label Maker
Language	English