Doosan DP158LDF - Page 66

5. About the engine
99
4) Attach 12 connecting rod and piston assembly as the
same procedure.
14. Attach the oil suction pipe and the oil pump.
DV2213087A
1) Attach the oil suction pipe and the oil pump(D).
2) Tighten M8 fixing bolt(C) at a tightening torque 2.
2
kg
f·m.
3) Tighten 2 M8 fixing bolts(B) at a tightening torque 2.
2
kg
f·m.
4) Tighten 2 M8 fixing bolt(A) at a tightening torque 2.
2
kg
f·m.
15. Attach the oil pan.
DV2213086A
1) Attach the oil pan(B).
2) Tighten 20 M8 fixing bolts(A) at a tightening tor
que
2.
2 kgf•m ± 0.33kgf•m.
16. Change the engine position.
DV2213185A
1) Change the engine positon. The piston direction is
upward.
17. Adjust the fuel injection timing.
DV2213027A
CAUTION
• Be careful to note the direction when attaching
t
he connecting rods and the connecting rod caps.
Ensure that the number engraved on the
connecting rods is same with that engraved on
the connecting rod caps and the assembly direc-
tion is same.
• Attacht the connecting rod and piston assembl
y
w
ithout contacting the crankshaft weight. Rotate
the crankshaft.
A
B
C
D
A
B