Doosan DP158LDF - Page 79

5. About the engine
112
9) Tighten 1 fixing bolt(A) and 2 fixing nuts(B).
52. Attach the water pump.
DV2213097A
1) Attach the water pump assembly(B).
2) Tighten 16 fixing bolts(A).
53. Attach the thermostat.
DV2213172A
1) Attach the gasket(C).
2) Attach the thermostat(A).
3) Attach the o-ring(B).
4) Attach 3 thermostats as the same procedure.
54. Attach the cooling water pipe.
DV2213078A
1) Attach the cooling water pipe(C).
2) Tighten the fixing bolts(A) and nuts(B) at a tighteni
ng
t
orque 2.2kgf·m ± 0.33kgf·m.
55. Attach the starter.
DV2213053A
1) Attach the starter(B).
2) Tighten 3 fixing bolts(A) at a tightening torq
ue
4.
4kgf·m ± 1.2kgf·m.
CAUTION
Make sure that the cooling fan pulley can be rotated
after attaching.
CAUTION
Be careful not to mix the fixing bolts each other.
A
B
B
C
A
A
B
C
A
B