XMPE0PCG125NST020 1st edition - 2020
MANDATORY CONDITIONS FOR ACCEPTANCE FOR REPAIRS
- Dear customer, every product to be sent to DOSEURO S.r.l. to perform maintenance, must be properly cleaned
and decontaminated.
On-site repair of the pumps can only be carried out if the service technician has been informed of the risks and of
the directives in force.
The service technician will open the packaging and start maintenance operations only after receiving confirmation of
the decontamination.
The goods sent to us that are considered by the company as a potential source of risks, shall be immediately
returned to the sender with the costs borne by the latter.
Remove the valve
unit from the pump head and wash it
separately so that no residue
remains trapped.
Place them in a bag.
Place the pump in a pre-set
position for
collecting washing
liquid, keeping at a
safe distance, wash
the pump using the reclamation
fluid, passing it
through the
valve unit hole and
allowing any deposits
present to
detach.
Fully drain
the oil contained in the
body of the reducer.
Position the pump firmly in suitable
packaging to avoid damage due to transport
and remember to place the
previously bagged valve unit back in the packaging.
The customer must accompany the goods with a declaration
that the material has been
reclaimed to be handled safely.
On at least two visible sides, place the labels showing
The AUTHORISED ACCEPTANCE NUMBER found
on the next page.
Adopt suitable protective measures in order to guarantee operator safety and protection and machine integrity, carefully
choosing the most suitable reclamation fluid.
To Next Page
Loading...
