SECTION 1 GENERAL INFORMATION
6 0855849enf 6/08
3.0 Glossary
allocation The maximum number of labels that the selected job will be allowed to
print before the user is prompted to reset the allocation count or a new job
is selected.
array See jet array.
backplane board Printed circuit board for I/O connections.
bar code reader A laser-equipped device that reads identification codes by scanning a strip
of parallel bars of varying widths, groups of which represent alphanumeric
characters.
BBE Best Before End; denotes the recommended date by which a product
should be used.
carton A container, usually made of cardboard, onto which the coder prints. Also
called case. See product.
case A container, usually made of cardboard, onto which the coder prints. Also
called carton. See product.
caution A potentially hazardous situation which, if not avoided, could result in
personal injury.
chamber A receptacle in the ink delivery module that stores ink.
CimControl® MARKEM proprietary software for networking multiple coders.
coder A machine such as the Model 5200 or 5400 that is primarily used to print
codes on the customer’s product.
Composer™ MARKEM proprietary software for designing images for the coder.
CoLOS™ Control MARKEM proprietary network software, for data transfer, remote operation
and machine monitor / data logging operations;
released in 2006.
CoLOS™ Create MARKEM proprietary software for designing images for the coder;
released in 2006.
download To retrieve a copy of a file from a computer and transfer it to the coder.
dynamic field Information in a job file that changes, such as a serial number or date.
enclosure The cabinet that houses the electrical components, VPC module, and ink
delivery module.
error A fault that generates a message on the display, and stops printing.
fault A problem with the coder that will generate an error or warning message
on the display, and will turn on an indicator LED on the user interface
module.
To Next Page
Loading...
