SECTION 3 PRINTING
0855849enf 6/08 43
5.0 Making Adjustments
5.1 Setting the LCD Contrast
NOTE: A quick method of changing the LCD contrast from any menu,
hold down the STOP key and press the Up Arrow or Down Arrow to
change the contrast in 5% increments.
The LCD contrast can be adjusted from the Machine Setup Menu.
1. From the Top Level menu, press F4 (Main Menu).
2. From the Main Menu, press F4 (Machine Setup).
If required, enter a password.
The Machine Setup menu will appear.
3. Use the Down-Arrow key until the pointer is beside User
Interface.
25 Jun 2006 15:17:49
Status
Machine:Ready PH1: On
State: Offline PH2: On
Ink: OK
Counts:
Batch : 999
Total : 53796
- Press ENTER to preview image -
Job: Chocolate
Job
Select
Reg.
+ / -
Main
Menu
Shutdown
Access Level : Level 3
Printhead 1 Settings...
Printhead 2 Settings...
Printhead Vacuum Settings...
Printhead Mapping...
Print Station Settings...
Shutdown Settings...
Password Settings...
Communications...
Machine Setup
Page
Up
Page
Down
User Interface...
To Next Page
Loading...
Need help?
General