SECTION 5 TROUBLESHOOTING
60 0855849enf 6/08
4.0 Beep Due to Open Ink Door
When the ink door is left open for an extended period of time, a beep
will sound. When the beep becomes continuous, the coder will
pause until manually reset.
• Close the ink door.
• Follow the prompts on the display to reset the coder.
5.0 The Purge Button Does Not Function
After five consecutive purges, pressing the Purge button will have no
effect. Another purge will not be allowed until the printhead is refilled
with ink. The LED indicator on the printhead will remain on while the
printhead is being refilled.
Wait a few minutes, and another purge will be allowed.
To Next Page
Loading...
Need help?
General