SECTION 1 GENERAL INFORMATION
0855849enf 6/08 13
4.5 Foreseen Use
The Model 5200/5400 is an industrial case coder, designed for
printing on substrates used in case and carton packaging, including
coated and uncoated corrugated cardboard, glossy surfaces, rigid
plastics, flexible films, and shrinkwrap.
This coder was designed for or adapted by Markem-Imaje to a
specific application at the time of sale. This application is the
intended use.
4.6 Misuse
Using this coder for anything other than the specific application can be
a misuse. Contact Markem-Imaje before attempting to use this coder
for anything other than the intended use.
Misuses include but are not limited to:
• Failing to observe instructions or directives pertaining to the
installation, use, and repair of this coder, including the use and
disposal of related chemicals.
• Operating an unserviceable, incomplete, or modified coder.
• Not observing safety messages and labels.
• Permitting an unqualified person to operate or repair this coder.
See “Training Programs.”
• Combining or interfacing other equipment with this coder for
anything other than the intended use.
• Using supplies or materials that are not recommended for use with
this coder, which may produce unsatisfactory or unexpected
results.
4.7 Training Programs
Operators, maintenance personnel, and service technicians are
considered qualified when they have gained, through training and
experience, an understanding of safe and correct methods of
operation, maintenance, or repair.
Markem-Imaje conducts training programs. In addition to ongoing
courses about current machine models, customers are invited to
inquire about any training need.
To Next Page
Loading...
