Dräger CMS User Manual

Dräger CMS Analyzer 45
Preparing for use
Save time format:
1. Press and hold side button.
Select date format:
2. Briefly press side button several times
until the following display appears:
Setup CMS
Date format
3. Press and hold side button until the
following display appears:
Date format
DD.MM.YY
D = Day
M = Month
Y = Year
The mode to be set is underlined.
4. Briefly press side button several times to
select the required date format.
Save date format:
 Press and hold side button until the
following display appears:
Setup CMS
Date format
The other Setup options and the
DataRecorder Read and Delete functions
can be selected by repeatedly pressing the
side button.
Exit Setup mode:
 Move sliding switch to position 0.
6.6 Setting the time and date
1. Prior to first commissioning and after the
battery replacement, set the time and
date.
2. Move sliding switch from position 0 to
position
1. Then immediately press and
hold side button until the following
display appears:
Setup CMS
Read DataRec
02022837_4en.eps
Setup CMS
Date format
02122837_4en.eps
Date format
D D . M M . Y Y
02022837_4en.eps
Setup CMS
Date format
10022837_4en.eps
0
1
2
3
0
1
2
3
Setup CMS
Read Data Rec

Dräger CMS Specifications

General

Brand	Dräger
Model	CMS
Category	Measuring Instruments
Language	English