62 Dräger CMS Analyzer
Technical data
12 Technical data
Ambient conditions
1)
Operation:
Temperature
Air pressure
Relative humidity
0 to 40 °C
700 to 1100 hPa
0 to 95 %
without condensation
Type of protection IP 54
Storage:
Temperature
Air pressure
Relative humidity
–20 to 60 °C
700 to 1100 hPa
0 to 95 %
Performance data
Measuring range, resolution Depends on type of chip being used
Measuring volume Max. 30 mL in 2 min. measuring time
Measuring time Between 20 seconds and 3 minutes,
depending on the concentration of the gas or vapour
and on the type of chip being used
Between 20 seconds and 10 minutes in the case of
special hazardous gases
Readiness for use Immediate
Intoxication effect Not possible
Calibration By manufacturer
Sample flow 7.5 to 15 mL/min,
electronically controlled
Analyzer data
Light source LEDs
Acquisition of measured values Six-fold optical system and waveguides,
reflectance measurement
Barcode reader Six-channel optical system
System diagnosis Automatic with microcontroller for all system
components
Display LCD, 2 x 16 characters,
alphanumerical, with backlighting
User guidance Plain text with LCD and buzzer
Menu languages English, German, French, Spanish
Operating time Approx. 450 measurement minutes
Power supply 4 x 1.5 V batteries.
Only the following types may be used:
For analyzer set (order no. 6405300): Ralston (Energizer) Alkaline LR6
Duracell MN 1500 LR6
Rayovac Rechargeable Alkaline AA
(Only in conjunction with a charger:
Rayovac Charger PS1 or PS3)
Material Analyzer housing Glass-fibre-reinforced polyamide
To Next Page
Loading...
Need help?
General
