Dräger HFG 000 Series Technical Manual

66 Technical manual | X-am® 3500/8000
Configuration
7.2.2 Configuring the gas detector with the PC and reading the data
memory
7.2.2.1 Connect the gas detector to a PC.
Equipment:
– DIRA USB cable (order number 83 17 409)
– DIRA dongle mount (order number 83 25 859)
Procedure:
1. Plug the DIRA dongle mount with the dongle into the gas detector.
2. Connect the DIRA USB cable to the PC.
7.2.2.2 Configuring the gas detector with the Dräger CC-Vision PC software and
reading the data memory
Requirements:
– The gas detector is connected to the PC.
To configure the gas detector using the Dräger CC-Vision PC program, refer to the
Dräger CC-Vision online help.
With the Dräger CC-Vision PC software, the data logger can be downloaded as a
text file.
7.2.2.3 Reading the data memory with Dräger GasVision
Requirements:
– The gas detector is connected to the PC.
The data memory is read ans visually represented with the Dräger GasVision PC
software (refer to the Dräger GasVision online help).

Dräger HFG 000 Series Specifications

General

Brand	Dräger
Model	HFG 000 Series
Category	Gas Detectors
Language	English