6 Technical manual | X-am
®
2800 / X-am
®
5800
Conventions in this document
2 Conventions in this document
2.1 Meaning of the warning notes
The following warning notes are used in this document to notify users of possible
dangers. The meanings of the warning notes are defined as follows:
2.2 Trade marks
The brands listed are only registered in certain countries and not necessarily in the
country in which this material is sold.
2.3 Glossary
Alert icon Signal word Consequences in case of nonob-
servance
WARNING Indicates a potentially hazardous situation.
If not avoided, it could result in death or
serious injury.
CAUTION Indicates a potentially hazardous situation.
If not avoided, it could result in physical
injury. It may also be used to alert against
unsafe practices.
NOTICE Indicates a potentially hazardous situation.
If not avoided, it could result in damage to
the product or environment.
Brand Brand owner
X-am
®
Dräger
Bluetooth
®
Bluetooth SIG, Inc.
Term Description
Life signal A periodic optical (green LED) and/or acoustic signal.
Monitoring Monitoring without pump (diffusion)
Capture range The capture range refers to a measured value range
within which minor variations in measured values (such
as signal noise, variations in concentration) do not cause
variations in the display. Measured values outside the
capture range will be displayed with the actual measured
value.
Peak Peak value
Quick bump test Test for alarm triggering
Extended bump test Test for accuracy
Special state If a special state is signalled, the user is not warned of
gas concentrations which may be dangerous.
The following device features are special states:
Initial set-up/configuration with the PC, switch-on
sequence, menu, bump test and calibration, warm-up 1
of the sensors, device error, measuring channel error.
To Next Page
Loading...
Need help?
General
