Dräger Oxylog 2000 - End of Operation and Storage

For
internal
use
only.
Copyright
reserved.
Drager Medizintechnik
Drager
Display:
Insp-XXXmL -Inspiratory tidal volume
Exp =XXXm L ..* * 0 : -Expiratory tidal volume
• Press the Reset key to display the current tidal volume (the last applied respiratory
stroke).
Display:
Nominal value calculated from VT and Freq.
Measured flow value (13.5 to 16.3 L/min)
• Press the Info key to display the actual tidal volume (the last given mechanical breath).
• Press the Info key and the Reset key simultaneously to return to the Extended Service
Mode (ESM).
Exiting the Extended Service Mode (ESM).
• Switch Oxylog 2000 off and on again to return to the normal operating mode.
DS-Modus 5503.160 Oxylog 2000 11/97 Service-Mode SW 2.xx
Page 39