Dräger Oxylog 2000 Manual

For
internal
use
only.
Copyright
reserved.
Drager Medizintechnik
2 Starting/Exiting the Customer Service Mode (CSM)
Important:
In the Customer Service Mode (CSM), only Test 001 through Test
005 are accessible to the customer or Drager service technician.
The other tests are deactivated.
• Turn the potentiometers for frequency Freq. and for tidal volume V T clockwise as far as
they will go.
• Press and hold the Info key and the Reset key simultaneously and switch on the
Oxylog 2000.
Display:
Self test
SW-version n.xx
n = 2 or 3
Customer
ServiceMode
Customer Service Mode (CSM)
• Release the two keys.
Display:
Adjust language
<- 0 0 1 + >
• Press the Reset key or the Info key to select Test 001 through Test 005.
• Press the Reset key and the Info key simultaneously to activate the respective test.
• Press the Reset key and the Info key simultaneously again to return to the Customer
Service Mode (CSM).
Exiting the Customer Service Mode (CSM)
• Switch Oxylog 2000 off and on again to return to the normal operating mode.
DS-Modus 5503.160 Oxylog 2000 11/97 Service-Mode SW 2.xx
Page 8

Dräger Oxylog 2000 Specifications

General

Brand	Dräger
Model	Oxylog 2000
Category	Medical Equipment
Language	English