Dräger Polaris 600 User Manual

Instructions for use Polaris 600 11
Safety-related information
Product-specific safety information
Subsequent installations on the system
Fitting accessories
Do not open the housing
Do not use non-sterile handles
Use of disposable sleeves
Exercise caution when working with the
system
WARNING
Danger due to incompatible components
Components which are subsequently
installed in the medical device must comply
with all regulatory or technical requirements
and certifications.
Compliance with all regulatory or technical
requirements for the complete system is the
responsibility of the operating organization of
the health-care facility.
The subsequent installation may only be
carried out by assembly personnel.
Non-compliance may result in impairment of
the correct functioning of the medical device.
Observe the accompanying documents of the
individual components.
WARNING
Danger due to incompatible components
Fitting accessories (e.g., a display on the
display mount) must be carried out in
accordance with the documents
accompanying the particular accessory.
Comply with the maximum load of the display
mount; refer to the technical data.
WARNING
Risk of electric shock
The display mount housing must not be
opened.
WARNING
Risk of infection
Personnel and patient may become infected
by a non-sterile handle.
Use only sterile handles.
WARNING
Risk of infection
Disposable sleeves can fall down into the
operating field.
Dräger recommends using disposable
sleeves from another manufacturer (e.g.,
Covidien) only with the corresponding handle
adapter for disposable sleeves from the same
manufacturer, see list of accessories.
WARNING
Risk of personal injury and property damage
Avoid collisions between the light
head/display mount or parts of the arm
system and other objects.
The travel path must be clear before the
product is adjusted in height or swiveled.

Dräger Polaris 600 Specifications

General

Brand	Dräger
Model	Polaris 600
Category	Medical Equipment
Language	English