Dräger Polaris 600 User Manual

Maintenance
74 Instructions for use Polaris 600
Maintenance
Overview
This chapter describes the maintenance measures
required to maintain the proper functioning of the
medical device. Maintenance measures must be
performed by the personnel responsible.
Definitions of maintenance terms
Inspection
Regular inspections must be carried out according
to the following specifications and at the stated
intervals. Technical documentation is available on
request.
WARNING
Risk of infection
The responsible personnel may be infected
by pathogenic germs.
Disinfect and clean device or device parts
before any maintenance measures and also
before returning the medical device for repair.
WARNING
Risk of electric shock
There are conducting components under the
housing cover.
– Do not remove the housing cover.
– Maintenance measures must be
performed by the personnel responsible.
Dräger recommends DrägerService for
repairs and complex maintenance tasks.
Term Definition
Maintenance All measures (inspection, preventive maintenance, repair) intended to maintain
and restore the functional condition of a medical device
Inspection Measures intended to determine and assess the actual state of a medical device
Preventive mainte-
nance
Recurrent specified measures intended to maintain the functional condition of a
medical device
Repair Measures intended to restore the functional condition of a medical device after a
device malfunction
CAUTION
Risk of electric shock
All poles of the power supply must be
disconnected when carrying out service activities
on the light system. The switch required to do this
is a part of the mains connection component.
The mains connection component must be
prevented from being switched on again
unintentionally.

Dräger Polaris 600 Specifications

General

Brand	Dräger
Model	Polaris 600
Category	Medical Equipment
Language	English