Horizon Compact Management
119
Horizon Compact Release 1.01.00 Wireless Ethernet Product User Manual – Volume 2
4.6.4 Enabling SSL per User Group
Web interface access for each user group may be configured so that SSL use is mandatory. If the use of
SSL is not mandatory for a user group then that group can choose between standard HTTP access and
HTTPS (SSL) access. For example, SSL may be made mandatory for all Noc and Admin level users, but
not required for the Super User.
Procedure 4-7
Configure Mandatory SSL Access for Each User Group
Perform this procedure to configure mandatory SSL access to the Horizon modem for each user group.
Note: To perform this procedure, you must have Super User rights.
Required Action Steps
login Log in as the Super User.
get http secure access status Displays the status of the user group's mandatory SSL access to the
Horizon's Web interface. If the secure access is not required then
users may access the Web interface both through standard HTTP and
through HTTPS (SSL).
Sequence:
get http secure access [user group] press Enter
where [user group] is one of: Super, Noc, Admin
Note: [user group] is case sensitive.
The system responds with one of the following:
The HTTP Secure access for [user group] users is [required/not
required]
Example:
The HTTP Secure access for Noc users is required.
set http secure access Sets the SSL access to mandatory for the selected user group. Once
set, the user group must access the Horizon Web interface using
HTTPS (SSL). Standard Web access through HTTP will be restricted
for that user group.
Sequence:
set http secure access [user group] [on/off] press Enter
The system responds:
The HTTP secure access is set successfully.
To Next Page
Loading...