Horizon Compact Release 1.01.00 Wireless Ethernet Product User Manual – Volume 2
Required Action Steps
get ssl certificate status Perform this step to verify the certificate is active. Displays the status
of the modem's SSL certificate.
Sequence:
get ssl certificate status press Enter
The system responds with one of the following:
No SSL certificate has been created yet.
Present but not linked to ip address.
SSL certificate is valid.
save mib Saves the MIB to RAM. Perform this command to save changes to
non-volatile memory.
Sequence:
save mib press Enter
The system responds:
MIB saved successfully.
This concludes the steps to generate an SSL certificate on the Horizon Compact using the CLI manager.
4.6.3 Installing Certificates on Your Web Browser
Browsers keep a list of trusted Certificate Authorities (CA) in order to verify SSL certificates. A default list
of CA's is included with the browser software. New CA's can be added to the browser by the user.
Since the Allegro Software Development Corporation certificate does not commonly appear in a
browser’s list of authorities, you will need to install it yourself. You must first verify that it has a valid
thumbprint or fingerprint. Once you have installed the Allegro certificate in your browser’s database for
trusted root authorities, you can securely communicate with devices running the Horizon SSL server.
Please refer to you Web browser's documentation for instructions on installation of certificates on your
particular browser.
These instructions are provided as an example as to how to install the certificate in Internet Explorer
versions 5.5 and 6. Earlier versions of Internet Explorer may work as well.
To Next Page
Loading...