Network Management of Horizon Compact
129
Horizon Compact Release 1.01.00 Wireless Ethernet Product User Manual – Volume 2
Required Action Steps
Current privacy Password for Entry [1] is [-]
Do you accept this value? [y|n]n
Enter privacy password: privpass
New privacy password for Entry [1] is set to [privpass]
Current status for Entry [1] is [Disabled]
Do you accept this value? [y|n]n
Do want to activate this entry? [0=disable| 1=enable ]: 1
New activate option for Entry [1] is set to [Enabled]
index userName authProt authPass privProt privPass status
=======================================================================
1 user1 MD5 authpass DES privpass enabled
2 NoAuth - NoPriv - disabled
3 NoAuth - NoPriv - disabled
4 NoAuth - NoPriv - disabled
5 NoAuth - NoPriv - disabled
Note: 1.Only maximum of 5 managers are allowed. If all the managers are
filled in, remove 1 manager by overwriting the particular index.
get snmpv3 managers Displays a list of configured SNMPv3 managers.
get snmpv3 managers press Enter
The system responds:
->get snmpv3 managers
index userName authProt authPass privProt privPass status
=============================================================
1 NoAuth - NoPriv - disabled
2 NoAuth - NoPriv - disabled
3 NoAuth - NoPriv - disabled
4 NoAuth - NoPriv - disabled
5 NoAuth - NoPriv - disabled
Note: 1.Only maximum of 5 managers are allowed. If all the managers are filled in, remove 1
manager by overwriting the particular index.
get snmpv3 trap hosts Displays a list of configured SNMPv3 trap hosts
Note that only the Super user can view the ip addresses of trap hosts.
Sequence:
get snmpv3 trap hosts press Enter
To Next Page