Horizon Compact Release 1.01.00 Wireless Ethernet Product User Manual – Volume 2
Required Action Steps
save mib
Saves the MIB to RAM. Perform this command save setting changes to non-
volatile memory.
Sequence:
save mib press Enter
The system responds:
MIB saved successfully.
reset system Resets the system to save the settings to FLASH and restart the system with
the new settings taking effect.
Sequence:
reset system press Enter
The system responds:
Are you sure you want to reset? Y(yes) or N(no)
press Y
The system will proceed to reset. You will have to log on again to regain
access.
This concludes the steps to set up the SNMP for the Horizon Compact system.
To Next Page
Loading...