Advanced Configuration Features
41
Horizon Compact Release 1.01.00 Wireless Ethernet Product User Manual – Volume 2
Required Action Steps
set cos default value Assigns packets that do not have CoS levels (not complying with
802.1P) to any one of the eight 802.1P CoS levels (0-7).
Sequence:
set cos default value [n] press Enter
where “n” is any number 0 through 7.
The system responds:
Packets without VLAN tag are treated as 802.1p priority: n
save mib
Saves the MIB to RAM. Perform this command to save setting
changes to non-volatile memory.
Sequence:
save mib press Enter
The system responds:
MIB saved successfully.
Reset system
A system reset is required to activate this feature.
Sequence
reset system press Enter
The system responds:
Are you sure you want to reset? Y(yes) or N(no)
press Y
The system will proceed to reset. You will have to log on again to
regain access.
This concludes the steps to configure 802.1P Priority Queuing using the CLI manager.
To Next Page
Loading...