DragonWave Horizon COMPACT - Page 80

DragonWave Inc. 80
Horizon Compact Release 1.01.00 Wireless Ethernet Product User Manual – Volume 2
Procedure 3-15
Configuring the Horizon Time and Date
Required Action Steps
login Log in as a NOC user.
get date time Returns the current date and time on the system.
Sequence:
get date time press Enter
The system responds:
Date and Time : 15/06/2007 14:17:42:237
set date time Sets the system date and time if SNTP is not enabled.
Sequence:
set date time [dd/mm/yyyy hh:mm:ss:ms]
Where dd – day (01 – 31)
mm – month (01 – 12)
yyyy – year ( 1970 – 2099)
hh – hour (0 – 23)
mm – minutes (0 – 59)
ss – seconds (0 – 59)
ms – milliseconds (0 – 999)
The system responds:
Date and Time : [dd/mm/yyyy hh:mm:ss:ms]
save mib Saves the MIB to RAM. Perform this command save setting changes
to non-volatile memory.
Sequence:
save mib press Enter
The system responds:
MIB saved successfully.