3-3
CH 3/ View Real Time Data
Turning Channels On/Off
Select channels
to display
From the Scope mode screen, press Chan to turn Volts/Amps channel selection on/off.
Any of the following will turn channels on/off:
• Press the desired Volts/Amps channel to turn it on/off.
• Press Volts or Amps button to turn on/off all channels of that parameter.
• Press A, B, C, D to turn on/off both the Volts and Amps for that channel.
Press OK to accept channel selection.
MARK202
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
