Vigor2620 Series User’s Guide
3
Vigor2620L,
Vigor2620Le,
Interface Description
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
DSL
Connecter for accessing the Internet.
SIM2/SIM1
SIM card slot(s).
P2-P1
(Vigor2620L)
Connecters for local network devices.
P4-P1
(Vigor2620Le)
Connecters for local network devices.
ON/OFF Power Switch.
PWR Connecter for a power adapter.
To Next Page
Loading...
Need help?
General
