Vigor2620 Series User’s Guide
179
Available settings are explained as follows:
Item Description
Mode Choose the mode for WDS setting. Disable mode will not
invoke any WDS setting. Repeater mode is for the second
one.
Security There are three types for security, Disable, WEP and
Pre-shared key. The setting you choose here will make the
following WEP or Pre-shared key field valid or not. Choose
one of the types for the router.
Pre-shared Key When Pre-Shared Key is selected as Security above,
configure the following settings if required.
Type – There are some types for you to choose. WPA and
WPA2 are used for WDS devices (e.g.2925n wireless router,
you can set the encryption mode as WPA or WPA2 to establish
your WDS system between AP and the router.
Key – Set the encryption key in this field. Type 8 ~ 63 ASCII
characters or 64 hexadecimal digits leading by “0x”.
Bridge
If you choose Bridge as the connecting mode, please Enter
the peer MAC address in these fields. Four peer MAC
addresses are allowed to be entered in this page at one time.
Yet please disable the unused link to get better
To Next Page
Loading...
Need help?
General
