Draytek Vigor2620 LTE Series User Manual

Vigor2620 Series User’s Guide
180
performance. If you want to invoke the peer MAC address,
remember to check Enable box in the front of the MAC
address after typing.
Repeater If you choose Repeater as the connecting mode, please Enter
the peer MAC address (of VigorAP/Vigor router required to
make connection with such Vigor router and used to extend
the wireless signal) in these fields.
Four peer MAC addresses are allowed to be entered in this
page at one time. Similarly, if you want to invoke the peer
MAC address, remember to check Enable box in the front of
the MAC address after typing.
Access Point Function Click Enable to make this router serve as an access point.
When Repeater is set as WDS Mode, click Enable to use such
function.
Click Disable if Bridge is set as WDS Mode.
Status It allows user to send “hello” message to peers. Yet, it is
valid only when the peer also supports this function.
After finishing all the settings here, please click OK to save the configuration.

Draytek Vigor2620 LTE Series Specifications

General

Brand	Draytek
Model	Vigor2620 LTE Series
Category	Network Router
Language	English