Draytek Vigor2920 Series User Manual

Vigor2920 Series User’s Guide
98
If a PPP-based service is selected, you should further specify the remote peer IP
Address, Username, Password, and VJ Compression for this Dial-In connection.
Settings in the remote host:
1. For Win98/ME, you may use "Dial-up Networking" to create the PPTP tunnel to Vigor
router.
For Win2000/XP, please use "Network and Dial-up connections" or “Smart VPN
Client”, complimentary software to help you create PPTP, L2TP, and L2TP over IPSec
tunnel. You can find it in CD-ROM in the package or go to www.DrayTek.com
download center. Install as instructed.
2. After successful installation, for the first time user, you should click on the Step 0.
Configure button. Reboot the host.
3. In Step 2. Connect to VPN Server, click Insert button to add a new entry.
If an IPSec-based service is selected as shown below,

Draytek Vigor2920 Series Specifications

General

Brand	Draytek
Model	Vigor2920 Series
Category	Network Router
Language	English