Vigor2920 Series User’s Guide
173
source IPs inside the LAN will be passed through the WAN
interface.
Destination IP
Any – Any IP can be treated as the destination IP.
Dest IP Start- Type the destination IP start for the
specified WAN interface.
Dest IP End - Type the destination IP end for the specified
WAN interface. If this field is blank, it means that all the
destination IPs will be passed through the WAN interface.
3. Click Next to get the following page.
Available settings are explained as follows:
Item Description
Interface
Use the drop down list to choose a WAN or LAN interface
or VPN profile. Packets match with the above criteria will
be transferred to the interface chosen here.
4. After specifying the interface, click Next to get the following page.
Available settings are explained as follows:
Item Description
Force NAT /Force
Routing
It determines which mechanism that the router will use to
forward the packet to WAN.
5. After choosing the mechanism, click Next to get the summary page for reference.
To Next Page
Loading...
Need help?
General
