Vigor2920 Series User’s Guide
192
Item Description
Sessions Control
The number typed here is the total sessions of the packets that
do not match the filter rule configured in this page. The default
setting is 60000.
Quality of Service
Choose one of the QoS rules to be applied as firewall rule. For
detailed information of setting QoS, please refer to the related
section later.
Load-Balance Policy
Choose the WAN interface for applying Load-Balance Policy.
User Management
Such item is available only when Rule-Based is selected in
User Management>>General Setup. The general firewall rule
will be applied to the user/user group/all users specified here.
Note: When there is no user profile or group profile
existed, Create New User or Create New Group item will
appear for you to click to create a new one.
APP Enforcement
Select an APP Enforcement profile for global IM/P2P
application blocking. If there is no profile for you to select,
please choose [Create New] from the drop down list in this
page to create a new profile. All the hosts in LAN must follow
the standard configured in the APP Enforcement profile
selected here. For detailed information, refer to the section of
APP Enforcement profile setup. For troubleshooting needs,
you can specify to record information for IM/P2P by checking
the Log box. It will be sent to Syslog server. Please refer to
section Syslog/Mail Alert for more detailed information.
URL Content Filter
Select one of the URL Content Filter profile settings (created
in CSM>> URL Content Filter) for applying with this router.
Please set at least one profile for choosing in CSM>> URL
To Next Page
Loading...
Need help?
General
