Vigor2920 Series User’s Guide
209
Available settings are explained as follows:
Item Description
Enable this account
Check this box to enable such user profile.
User Name
Type a name for such user profile (e.g., LAN_User_Group_1,
WLAN_User_Group_A, WLAN_User_Group_B, etc). When a
user tries to access Internet through this router, an
authentication step must be performed first. The user has to
type the User Name specified here to pass the authentication.
When the user passes the authentication, he/she can access
Internet via this router. However the accessing operation will
be restricted with the conditions configured in this user profile.
Password
Type a password for such profile (e.g., lug123,
wug123,wug456, etc). When a user tries to access Internet
through this router, an authentication step must be performed
first. The user has to type the password specified here to pass
the authentication. When the user passes the authentication,
he/she can access Internet via this router with the limitation
configured in this user profile.
Confirm Password
Type the password again for confirmation.
Idle Timeout
If the user is idle over the limitation of the timer, the network
connection will be stopped for such user. By default, the Idle
Timeout is set to 10 minutes.
To Next Page
Loading...
Need help?
General
