Vigor3900 Series User’s Guide
134
Time Profile
Choose a schedule profile to be applied on such rule.
You can click
to create another new time object profile.
Source IP
Choose one or more IP object profiles from the drop down
list. The selected profile will be treated as source IP.
You can click
to create another new IP object profile.
Destination IP
Choose one or more IP object profiles from the drop down
list. The selected profile will be treated as destination IP.
You can click
to create another new IP object profile.
Service Type
Choose one or more service type object profiles from the
drop down list. The selected profile will be treated as service
type.
You can click
to create another new service type object
profile.
Input Interface
Choose one of the LAN or WAN profiles as data receiving
interface.
Output Interface
Choose one of the LAN or WAN profiles as data
transmitting interface.
Fragments
Specify the action for fragmented packets.
do_not_care -No action will be taken towards fragmented
packets.
unfragment - Apply the rule to unfragmented packets.
fragment - Apply the rule to fragmented packets.
Action
The action to be taken when packets match the rule.
Block - Packets matching the rule will be dropped
immediately
Pass - Packets matching the rule will be passed immediately.
Block_If_No_Further_Match - A packet matching the rule,
and that does not match further rules, will be dropped.
Pass_If_No_Further_Match - A packet matching the rule,
and that does not match further rules, will be passed through.
Syslog
Click Enable to make the history of firewall actions
appearing on the System Maintenance >> Syslog/Mail
Alert >> Syslog File.
To Next Page
Loading...
Need help?
General
