Vigor3900 Series User’s Guide
212
Type
Specify which protocol (PPTP or IPSec) will be used for
such VPN profile.
VPN Settings Via
Select From Current Settings - Current VPN LAN to LAN
profiles will be listed below such setting. Choose the one
you need.
Create New VPN Profile – It allows you to create a new
VPN LAN to LAN profile. Simply type the name in the field
of Profile Name. The field of Profile Name is available only
when you click this setting.
Profile Name Type a new name for such profile.
3. Click Create New VPN Profile and type the name of the profile. Click Next to get the
following page. Note that such page will be skipped if you choose IPSec as the Type in
Step 1.
Available parameters are listed as follows:
Item Description
Enable This Profile
Check this box to enable such profile.
Authentication
Protocol
The router will authenticate the dial-in user with the protocol
selected here.
PAP - It means the router will attempt to authenticate dial-in
users with the PAP protocol.
CHAP - It means the router will attempt to authenticate
To Next Page
Loading...
Need help?
General
