Vigor3900 Series User’s Guide
213
dial-in users with the CHAP protocol.
User Authentication
Type
Set user authentication to Local server or RADIUS server.
LAN Profile
Choose a LAN profile for PPTP Server if Local is selected
as user authentication type.
4. Fill in the required information on this page and click Next to go to next page.
Available parameters are listed as follows:
Item Description
Profile
Display the name of the profile.
Enable This Profile
Check this box to enable such profile.
PPTP User Name
Type a user name for authentication in PPTP connection.
Such profile shall be created in User Management>>User
Profile previously. Otherwise, there are no selections
displayed here.
Local IP / Subnet
Mask
Type the IP address and subnet mask of local host.
Remote IP / Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.