Vigor3900 Series User’s Guide
60
Different IPv4 and IPv6 protocol types specified will bring up different configuration web
page.
z If you choose Static as IPv4 protocol type, click the Static Tab to open the following
page:
Available parameters are listed as follows:
Item Description
IP Address
Type the IP address specified for such profile.
Subnet Mask
Use the drop down list to choose the subnet mask for such
profile.
Gateway IP
Address
Type the gateway address for such profile.
– click the icon to clear the address setting.
DNS Server IP
Address
Type a public IP address as the primary DNS (Domain Name
Server). To add a new IP address, simply place the mouse
cursor on this filed. The following dialog will appear.
Add – click this button to have a field for adding a new IP
address.
Save – click this button to save the setting.
– click the icon to remove the selected entry.
IP Alias
Type other IP addresses to be bound to this interface. This
setting is optional. If you have typed addresses here, you can
see and choose it in later web page settings (e.g.,