39
DHCP Lease Table Shows the DHCP Lease Table, the unit of Lease time is Minute.
DHCP Lease Table
Setting
Allow to set corresponding settings for DHCP lease settings
Lease Table Name Specify the name of the lease table
Start IP Set the start IP address of the lease table
End IP Set the end IP address of the lease table, the network device connected
to LAN port will get IP address between Start IP and End IP by DHCP.
Netmask Set the Netmask of the lease table
Gateway Set the Gateway of the lease table
Lease Time Set the Lease Time of the lease table
DNS Set the default DNS server IP of the lease table; Click the Add button to
submit and add this lease table
DHCP Lease Table
Delete
Lease Table Name - Select name of lease table, click the Delete button
will delete the selected lease table from DHCP lease table.
DNS Relay Select DNS Relay. The default is enabled. Click the Apply button to
become effective.
Apply Save the settings.
Notice:
1. The size of lease table can not be larger than the quantity of C network IP address. We
recommend you to use the default lease table and not modify it.
2. If you modify the DHCP lease table, you need save the configuration and reboot.
To Next Page
Loading...
