85
z Using handset instead of hands-free during a talk
Hook off the handset when you use hands-free and want to change to use handset. Just hook on to
finish talk.
z Using headset instead of hands-free during a talk
In the hands-free calls, press the Headset key . You can use the headset to call.
After that, press the key again to hang up the call.
z Using headset instead of handset during a talk
In the handset call, the Headset key , hang up the handset to continue using the
headset call. After the call, press the key again to cut off the call.
z Using handset instead of headset during a talk
In the headset call, hook off the handset after the call, just hook on to finish talk.
4
4
.
.
3
3
P
P
l
l
a
a
c
c
e
e
C
C
a
a
l
l
l
l
s
s
z Using handset
Hook off (screen will show the current using line, or you could press key L1-L3 to select), after
getting dialing tone, you could begin to dial number. After finishing it, press # and the IP phone
will send the number and call the number. When you hear a ring-back tone and screen shows the
callee’s number, it shows that the person you called is ringing. If a callee answers the call, you can
begin to talk and your phone will keep showing the callee’s number and counting time. Just hang
up to finish talk.
z Using headset
Standby, press the Headset key (on screen display “Enter Number Pls”) and hear
the dialing tone, you can start dialing. After finishing it, press # or press the softkey2-Send.
IP Phone can immediately begin connecting with each other. When you hear a ring-back tone
and screen shows the callee’s number, it shows that the person you called is ringing. If callee
answers the call, you can begin to talk and your phone will keep showing callee’s number and
counting time. Just press [Headset] key to finish talk.
z Using hands-free
Press the Hands-free key （screen will show the current using line, or you could press key
L1-L3 to select), after getting dialing tone, you could begin to dial number. After finishing it, press
# and the IP phone will send the number and call the number. When you hear the ringback tone and
screen shows the callee’s number, it shows that the person you called is ringing. If the callee
answers the call, you can begin to talk and your phone will keep showing callee’s number and
counting time. Press
again to finish talk.
z Using directory
Press Soft3 (PBook) in stand-by mode, you will access to phonebook. If there are many persons
records stored in the directory, you can use navigation keys
& to select number
To Next Page
Loading...
